Research on various Drymix mortar additives

High-quality cement, fine aggregates, fillers, dry polymer powder and various additives, and aging-resistant iron oxide pigments usually compound the jointing agent for exterior wall tiles. It has no cracking, considerable plasticity, and good adhesion. In addition, it has the characteristics of impermeability, waterproof, and good temperature resistance. Therefore, using a special grouting agent for exterior wall tiles is the best way to prevent external wall leakage, avoiding many complaints and high additional costs for maintenance.

(1) Product characteristics

1) Enhance the bonding force between tiles;

2) Strong tensile performance, remarkable plasticity, no cracking, no falling off;

3) Waterproof, impermeable, non-discoloration;

4) The powder is easy to use in bags and can be used by adding water and stirring on the site;

5) There are a variety of colors to choose from, which will not fade for a long time;

6) Environmentally friendly and non-toxic.

(2) Scope of application

The exterior wall tile grouting agent is suitable for the tile grouting of various commercial residences, industrial buildings, restaurants, hospitals, and other exterior walls.

Interior wall tile grout

The tile grout for the interior wall is mainly used in kitchens and bathrooms. In addition to certain toughness, no cracking, and good bonding strength, its unique formula also requires excellent corrosion resistance against mold, algae, and microorganisms. Especially in the bathroom, which is humid for a long time, it is easy to cause mildew, so there are higher requirements. At the same time, the tile grout should also have good anti-seepage and waterproof properties, especially in modern houses; the primary and second bedrooms also have bathrooms. Moisture, water, vapor, and shower water can slowly penetrate along the cracks between the tiles. If the wall is in a water-soaked environment for a long time, it will cause mildew on the bedroom wall. It should be noted that the traditional method of using white cement pointing alone does not have the characteristics of a special pointing agent.